Crane and Hoist
Inspections & Maintenance
Overhead Cranes, Monorails, Hoists, Truck-Mounted Cranes & Rigging
At Venter Cranes, we believe safety and reliability start with proper inspections and proactive maintenance, not “drive-by inspections.”
Every inspection follows a thorough, hands-on process designed to keep your lifting equipment compliant, reliable, and safe.
The Venter Difference
Choose Venter Cranes for inspections and maintenance that go beyond compliance—delivering safety, reliability, and peace of mind.
OEM Expertise
Authorized service provider for Demag and R&M, with factory-trained technicians and access to KITO, KONE, CONDRA, STAHL, and more
Proactive Service
Issues are identified and corrected on-site, where possible, to prevent future failures
Transparent Documentation
Reports with photos, standards referenced, and clear next steps
Trusted Systems
Inspection methods developed by our Operations Manager, drawing on 35 years of crane experience
Local & Responsive
Based in Saskatoon, serving Saskatchewan and Northern Canada with local, qualified technicians
Family-Owned Reliability
Decades of hands-on crane experience, built on trust and old-fashioned customer care
Our Safety Commitment
At Venter Cranes, safety is non-negotiable. As an ISNetworld-registered contractor and SECOR-certified company, we adhere to the highest safety management standards in our industry.
Every inspection and maintenance service is performed with a focus on protecting your people, your assets, and your production environment.
Our certifications reflect not only compliance, but a deep commitment to continuous improvement and workplace safety.
Inspections that deliver safety, reliability, and long-term value
Our technicians carry out all inspections using the latest CSA B167-16 and OHS standards and go beyond simple checklists.
Comprehensive Reporting
We provide detailed, photo-supported reports with CSA/OHS code references and digital logbooks you can rely on for audits and planning.
Proactive Maintenance
We don’t just tell you what needs service—we do it. From tightening wires to resetting brakes, our inspections include corrective actions on the spot to prevent future equipment failure.
Actionable
Insights
We share clear, actionable recommendations for compliance and future planning. By identifying wear early, we help you plan repairs before breakdowns occur, saving you time and money.
Trusted
Expertise
Our inspection methods were developed by our Operations Manager, drawing on 35 years of crane experience across container handling, vessel cranes, and production cranes up to 250 tonnes.
Unlike “drive-by” inspections, our certified technicians take a hands-on approach. We don’t just tell you what’s wrong – we service it during the inspection whenever possible.
More than a checklist
During an inspection, our certified technicians also:
-
Check brake pad thickness, adjust brakes, and reset to manufacturer tolerances
-
Inspect and tighten wiring connections for safety and reliability
-
Check hooks, ropes, chains, and safety devices for wear and damage
-
Test contactor resistances and limit switches to meet manufacturer standards
-
Tighten bolts, adjust settings, and correct issues on-site
Time well spent
We design inspections to do more than meet compliance – we design them to reduce downtime and give you peace of mind. We invest the right amount of time in your equipment, because safety and reliability can’t be rushed.
Inspection times you can expect:
-
5 to 15-tonne single girder = ~4 hours
-
16 to 20-tonne overhead crane = 5–6 hours
-
22-tonne (or more) double girder = 6–8 hours
-
5-tonne underslung hoist = 2–3 hours
-
Additional dual hoists = +2–3 hours each
Times vary depending on crane type, location, and site conditions. These are averages to help you plan for proper service.
Preventive maintenance goes beyond inspections
It’s a hands-on service program designed to keep your lifting equipment safe, reliable, and compliant – all while reducing costly downtime.
At Venter Cranes, preventive maintenance isn’t a box to check – it’s a partnership to keep your cranes lifting safely, day after day.
During these visits, our technicians:
Open, inspect, and service brakes
Lubricate moving parts
Perform electrical and mechanical adjustments
Check structural integrity (e.g. welds, bolts, fittings)
Identify worn parts and schedule timely replacements
Why it matters
Fewer surprises
Address small issues before they turn into major breakdowns.
Extended equipment life
Protect your investment and avoid premature replacements.
Code compliance
Stay aligned with CSA and OHS requirements without scrambling for last-minute fixes.
Planned scheduling
We work with you to set maintenance intervals around your operations, not against them.